深圳市欧深特信息技术有限公司
Shenzhen Ousent Technologies CO.,LTD
Add: Floor 2 Building 1 Shunheda Industrial Area. 72Block Baoan District. Shenzhen City Guangdong P.R. CHINA
Tel: (+86) 755 27889675
Fax: (+86) 755 27889675 ext 808
Website: www.ousent.com
5
1. This product is suitable for indoor application.
2. Put on the dust cover of fiber interface when not used.
3. Verify the product power supply conforms to your country AC power requirement before insert the power plug
4. It is forbidden to stare at the TX fiber-transfer end with naked eyes.
Trouble shooting
1.Device is not matched. Please select the corresponding network device according to the transfer rate of the product (10Mbps or
100Mbps or 1000M) when connected to other network devices(network card ,hub, switch).
2.Line loss is excessive during the fiber wiring. Excessive loss in connector plug-in and fiber soldering wedding, and excessive
intermediate nodes may cause excessive loss rate or abnormal operation.
Appendix
UTP complies with IEEE802.3 Standards, and has two types: T568A T568B.
Parallel cable: connect T568A to T568A , or T568B to T568B
Crossing cable: connect T568A to T568B
Note: Connecting to Router, Bridge or Switch, please refer to the device Technical Manual.
Notice:
Ousent reserves the right to make changes to or discontinue any optical link product or service identified in this publication without
notice in order to improve design and or performance.
Applications that are described herein for any of the optical link products are for illustrative purposes only. Ousent makes no
representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Contact:
Add: Floor 2 Building 1 Shunheda Industrial Area. 72Block Baoan District. Shenzhen City Guangdong P.R. CHINA
Tel: (+86) 755 27889675
Fax: (+86) 755 27889675 ext 808
Postal:518057
E-mail:[email protected]
Website: www.ousent.com
Cautions
