If you want to exit the Wireless Wi-Fi LAN,Press the “SWITCH”key again.
6.Upgrade Firmware
Insure the HDM-05 player have connected to the internet, with wire or Wi-Fi,press
the “ADD FAV”key of the remote control,now the power LED on the front panel will
twinkle.The HDM-05 will upgrade firmware automatically through the internet.
When upgrading is done,the power LED will stop twinkle and light last.
Ⅲ、
Troubleshoot For Simple Breakdown
In the case that the machine hasn’t any response when power, first make sure if
the power supply is connected well at each end and then check if the 220V/110V
change-over switch is toggled.Then inspect if the fuse has already fused.The
location of the fuse box is shown as the following figure.
Pry the fuse box open by the“—” screwdriver and the two fuses will be found to be
embedded in the cover, one in the square plastic tube kept as back-up fuse and
the other inlayed in the plastic connector below as the working fuse.Make sure if
the working fuse is burnt out,and if so,please use the back-up fuse to replace it.
If the player still can’t work after the above mentioned troubles are solved,please
contact us for repair.
Summary of Contents for HDM-05
Page 5: ...1 3 Remote Control Guide ...