Shenzhen JingFeng HDM-05, User Manual

Page: 6 / 11

No.
Button
name
Button
icon
Functions
1 Standby
After powered on,the remote control will get into standby
status until powered off.It will take 3 seconds to power off by
pressing this key
（
Not support use
）
2 Mute Mute sounds or open audio.
3
Function
switch
Switch for Wi-Fi and wire LAN.
4 Vol+/Up
The more the Vol+ key is pressed the higher the volume
becomes in playing interface or press the Vol+ key to
increase the volume continuously.
5 Vol-/Down
The more the Vol- key is pressed the lower the volume
becomes in playing interface or press the Vol- key to lower
the volume continuously.
6 Last Press this key to play the last file.
7 Next Press this key to play the next file .
8
Play/Paus
e
Press this key to play local source files .Then press it to
pause in play status and press it again to keep playing.
9 Stop Press this key to stop playing.
10
Timing
mode
Press this key to select timing mode:in order or reverse
order.
11
Fast
backward
Get the playback progress fast backward.
12
Fast
Forward
Get the playback progress fast forward.
13 Back
Exit to no working status when playing the local source.Or
exit DAC decoding .
14
Functional
key
Go into Wi-Fi Direct status and press it again to exit Wi-Fi
Direct status.
15 DAC
Press this key in no working state,will switch to DAC statue
for decoding the external digital audio signal .Press the first
time it will choose the signal from digital input RCA1 ,again
choose digital input RCA2 ,one more time press it will
choose optical input...and that cycle repeats.
16
@ @
Press it to check the password automatically when Wi-Fi
connect.
17
Firmware
upgrade
ADD
FAV
Press it to upgrade the firmware when connect to internet
by wire or Wi-Fi.