background image

 

 

                     

 

REV

A0   

                                                    BD-8508G User manual                                               

              Page 

4

 /5                        

Shenzhen bondidea technology co.,limited 

 

 

 

Attention  

1

 

To achieve optimal effect, keep the receiver 20 cm away from computer display and peripheral equipment     

                 

 

         

2.    Please don’t mix the different of the batteries when using, also don’t mix the same battery for old or new.     

3.

 

It can prolong the batteries life if you use the mouse on the white surface. 

4.

 

Auto-sleeping and power-saving function, it will be auto-sleeping without operation within a long time, press any key or 

scroll wheel to activate it. 

5.

 

Optical may not normal use in smooth desktop, glass, reflective, dark black and 3D mouse pad.   

 

6.

 

Please turn off the power if you‘re in traveling or you’ll not use it for a long time. 

7.

 

When mouse work on metallic surface, the best way is to place a mouse pad under mouse or lay the receiver horizontally to 

achieve the optimal receiving effect. 

8.

 

No need to connect data again when replace battery (built-in memory function.) 

9.

 

Make sure the battery capacity is enough , mouse can’t use normally please try the following steps 

A.

 

Turn off the power switch at the bottom of the mouse   

B.

 

Put the batteries into the battery cell according to the right pole ( please take notice of the battery pole ) 

C.

 

Press the middle and right keys at the same time. Open the power switch to “on” at the bottom of the mouse, the low 

voltage alarm indicator will flash for 30 seconds and turn into seching code situation. By the time, mouse bottom light 

shows red, it means the battery installation is right. 

D.

 

Please insert receiver into computer USB interface, computer will test and install automatically. 

E.

 

Put the mouse from the receiver within 20CM (this place is more close which will be better for mouse code); by the 

time the mouse low voltage alarm indicator stop flash, that means cooding successfully.   

F.

 

Mouse will use normally after code ok, if can’t use please repeat the above steps. 

       

Technical Instructions   

Adopt 2.4G Hz wireless high frequency technology, satisfying Europe R&TTE Directive1999/5/EC requirement, its 

radiation will not harmful for men’s body (much less than mobile radiation), wireless emission will occur electromagnetic 

signal, please be caution to use when in the using heart pacemaker or related to body assistant instrument surroundings 

 

Disclaimer 

We made every effort to ensure that the information and procedure in this guide is accurate and complete, no liability 

can be accepted for any errors or omissions and reserves the right to make any changes without further notices to any products 

herein. 

 

 

 

 

Reviews: