ShenPaz Blazir User Manual Download Page 39 | Manualshive

Page: 39 / 43

ShenPaz Blazir User Manual Download Page 39

Ver 1.11 2018

39

b)

Disconnect the furnace from the electricity. In case the
furnace's surface is hot

–

leave it unplugged until the furnace

cools down completely.

c)

Clean the furnace using dry cloth only.

d)

DO NOT clean the furnace using any cleaning agents, but dry
cloth only.

9. Warranty and service

ShenPaz Dental Ltd. warrants that the non-consumable parts of this product
including, but not limited to, the muffle are not defective for a period of one (1)
year.

In the event that this product proves defective within a period of the one (1) year
of work from the date of shipment to Buyer, Buyers' exclusive remedy shall be at
ShenPaz Dental Ltd. option; either replacement of the product or defective part
or component, free of charge.

10. Disclaimer

DISCLAIMER of Consequential Damages:

ShenPaz Dental Ltd. hereby disclaims

any liability for loss or damage, direct or consequential that results from the use
of this product.

Disclaimer of ALL other Warranties:

THERE ARE NO OTHER WARRANTIES OR ANY KIND, EXPRESSED OR IMPLIED,
CONNECTED WITH THE SALE OF THIS PRODUCT. SHENPAZ DENTAL LTD.
SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY.

«
...
37
38
39
40
41
...
»

Summary of Contents for Blazir












































Reviews:

No comments