Page 5
Page 5
3. INSTALL SIDE RAILS AND SHELTERLOCK
™
STABILIzER BLOCKS:
A. Place assembled first end rib in the staked area. Place the
ShelterLock
™
on the upright as shown in Detail D. From the
outside of the rib insert the bolt through the upright and then
through the ShelterLock
™
.
B. Place the plain end of the side rail over the bolt and nest
it into the ShelterLock
™
. Install the nut onto the bolt and
tighten. Repeat these steps for the opposite side and all of
the remaining ribs. The side rails for the last rib will have two
plain ends.
4. INSTALL WIND BRACES:
A. Attach wind brace between the end rib and the first
middle rib as shown in Detail E. Bolts attached at the
cross rails should be inserted facing inside the shelter.
5. INSTALL TOP RAIL:
A. Place the first top rail under each
end rib and secure it
with a bolt as shown in Detail F. The same cross rail should
lay on top of the all middle ribs. Secure the rails to the frame
with the hardware indicated in Detail F. The top rail attached
to the last rib will be installed under the pipe.
detail d
detail e
detail F
FirSt
middle
rib
wind braCe
end rib
00669
10210
install the top rail
Over all middle ribs
Under First and last ribs
Fig. 2
800260
1010
10135
10135
00670
02030
02030
02030
02030
05-10DT13-0A
