ShelterLogic AccelaFrame, Installation Instructions Manual

Page: 2 / 16

2
ATTENTION:
This shelter product is manufactured with quality materials. It is designed to fit the
ShelterLogic® Corp
. custom
fabric cover included. ShelterLogic® Corp . Shelters offer storage and protection from damage caused by sun, light rain, tree
sap, animal - bird excrement and light snow. Please anchor this S helterLogic® Corp . structure properly. See manual for more
anchoring details. Proper anchoring, keeping cover tight and free of snow and debris is the responsibility of the consumer.
Please read and understand the installation detail, warnings and cautions prior to beginning installation. If you have any
questions call the customer service number listed below. Please refer to the warranty card inside this package.
DANGER: Prior to installation, consult with all local municipal codes regarding installation of temporary shelters. Choose the
location of your shelter carefully. DANGER: Keep away from electrical wires. Check for overhead utility lines, tree branches
or other structures. Check for underground pipes or wires before you dig. DO NOT install near roof lines or other structures
that could shed snow, ice or excessive run off onto your shelter. DO NOT hang objects from the roof or support cables.
WARNING:
Risk of fire. DO NOT smoke or use open flame devices (including grills, fire pits, deep fryers, smokers or lanterns,
etc.) in or around the shelter. DO NOT store flammable liquids
(gasoline, kerosene, propane, etc.) in or around your shelter. Do not expose top or sides of the shelter to open fire or other
flame source. CAUTION: Use CAUTION when erecting the frame. Use safety goggles during installation. Secure and bolt
together overhead poles during assembly. Be aware of pole ends.
PROPER ANCHORING AND INSTALLATION OF FRAME: PROPER ANCHORING OF THE FRAME IS THE RESPONSIBILITY OF THE
CONSUMER.
ShelterLogic® Corp
. is not responsible for damage to the unit or the contents from acts of nature. Any shelter that is not
anchored securely has the potential to fly away causing damage, and is not covered under the warranty. Periodically check
the anchors to ensure stability of shelter. ShelterLogic® Corp . cannot be responsible for any shelter that blows away. NOTE:
Your shelter’s cover can be quickly removed and stored prior to severe weather conditions. If strong winds or severe
weather is forecast in your area, we recommend removal of cover.
REPLACEMENT PARTS, ASSEMBLY, SPECIAL ORDERS : Genuine ShelterLogic® Corp . replacement parts and accessories are
available from the factory, including anchoring kits for nearly any application, replacement covers, wall and enclosure kits,
vent and light kits, frame parts, zippered doors and other accessories. All items are shipped factory direct to your door.
CARE AND CLEANING:
A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can
accelerate deterioration of cover fabric. Immediately remove any accumulated snow or ice from the roof structure with a
broom, mop or other soft-sided instrument. Use extreme caution when removing snow from cover- always remove from
outside the structure. DO NOT use hard-edged tools or instruments like rakes or shovels to remove snow. This could result
in punctures to the cover. DO NOT use bleach or harsh abrasive products to clean the fabric cover. Cover is easily cleaned
with mild soap and water.
Covered by U.S. Patents and patents pending: 6,871,614; 6,994,099; 7,296,584; D 430,306; D 415,571; D 414,564; D
409,310; D 415,572 .