05_70435_70437_0B
Page 8
8. DooR pAnel AnD BAcK pAnel InSTAllATIon
A.
(
1
) Hold end panel at the top center with white inner surface facing inside of the shelter. (
2
) Wrap the edges
of the fabric panel around the end rib and line up the cross rails with the pre made slits in the fabric.
A1
A2
C.
(
1
) Disconnect side cross rail from the end rib.
(
2
) Pull the end panel over the end rib and bring the end of the cross rail through the cut slit in the panel.
(
3
) Reattach the side cross rail to the end rib.
c2
c3
B.
(
1
) Disconnect top cross rail (the horizontal pipe that runs from front to back along the top) from the end rib.
Leave the ShelterLock II
®
attached to the rib with the bolt.
(
2
) Pull the end panel over the end rib and bring the end of the cross rail through the cut slit in the panel.
(
3
) Reattach the top cross rail to the end rib.
c1
B2
B3
B1
