Basic Frame Assembly
STEP 2: ASSEMBLE END RIBS
Fig. 2
STEP 3: ASSEMBLE MIDDLE RIBS
Fig. 3
Fig.3
Fig.2
10121
2" Bolts
End Rib
STEP
1: PLOTTING THE FRAME
Fig. 1
12'
12'
Length of
Building
Before building your shelter, you should choose a flat area on your property and plot
your shelter.
1.
Stake out the area for the shelter in the desired spot. The width of the area
should be at least equal to the width of the shelter and the length should be
equal to the length (“L”) of the shelter Fig. 1.
2.
To be sure the staked area is square tie a rope diagonally from corner to corner.
3.
Measure from where the two ropes intersect each other to all 4 corners. This
measurement should be the same. If they are not equal the stakes need to be
adjusted until the width, length and inside measurements are correct.
10132
10132
10127
10127
10125
10125
Assemble end ribs as shown in Fig. 2. Securely
fasten all of the joints with the hardware indicated.
Assemble all of the middle ribs as shown in Fig. 3. Securely fasten
all of the joints with the hardware indicated.
Fig.1
10128
10128
10223
10223
10131
2" Bolts
Middle Rib
10132
10132
10125
10125
10126
10126
Page 3
10223
10223
12'x20'x10' is the base frame dimension. Your model may have more middle ribs than shown in the illustration on pg.2. You will
receive one extra rib for every extra 4 ft. of building length that you purchase. The basic frame assembly will remain the same. The
cover will be the correct size for the length of the building.
NOTE: FRAME EXTENSION KIT
