1. Check the battery chemistry and voltage before charging it with our
product. The battery information can be found in the vehicle's owner's
manual.
2. Turn off the power loads such as headlamps, air-conditioning and
radio before charging the battery.
1. Connect the battery clamps or eyelet terminal connectors to the DC
connector of the battery charger.
2. Plug the charger into an outlet. The red power Indicator will turn on.
At the same time 6V SLA and 12V SLA indicators will flash alternately.
3. To charge a 12V Li-ion battery, change the battery type by pressing
the “MODE”
to toggle to 12V Li-ion battery. The green indicator
light for 12V Li-ion battery will turn on. Otherwise, go to step 4.
4. Connect the black battery clamp or eyelet terminal connector to the
negative (NEG, N, -) battery terminal.
5. Connect the red battery clamp or eyelet terminal connector to the
positive (POS, P, +) battery terminal.
6. The charger will auto-detect the voltage of the SLA battery and the
green indicator light of the detected battery type will flash.
• If 12V Li-ion is selected, the corresponding indicator will flash.
• To change the charging voltage of the SLA battery, follow the
instruction of Mode change.
7. The charger will now go through the pre-programmed charging steps.
The corresponding battery type indicator will keep flashing.
• Refer to the table below for the explanation of the indicator lights.
8. When charging is finished and the battery is confirmed to be in good
condition, the battery type indicator will turn to solid green. The
charger will go into the maintenance step and will trickle charge the
battery as needed. The charger can be disconnected from the battery
at any time.
9. When disconnecting the battery charger, unplug the charger from the
outlet first. Remove the black clamp and then the red clamp or directly
remove the eyelet terminal connectors.
If the charger fails to detect a 12V SLA battery, press and hold “MODE”
for 3 seconds, the charging mode will be changed from 6V SLA to
12V SLA.
Before connecting to the battery
Charging setup
Mode change
