manualshive.com logo in svg

Shearwater Petrel EXT, Operation Manual, Page: 57 / 65

Share
Download
Shearwater Petrel EXT Operation Manual Download Page 57

Shearwater Petrel

Revision 1.1.0

57

Shearwater Research Inc.

Firmware Upload and Dive Log Download

Bluetooth communications are used for both Firmware Uploading and Dive Log Downloading�

NOTE:

 Upgrading the firmware resets decompression tissue loading. Plan repetitive dives 

accordingly� 

Start a Bluetooth connection by selecting the Upload Log menu�

The Petrel screen will switch from  ”Initializing” to “Wait PC” which will have a countdown�

Now go back to the Shearwater Desktop� Click start from the open “Update Firmware Box”, or 

“Download Log.”  The PC will then connect to the Petrel, and send the new firmware.  

The Petrel screen will give percentile updates of receiving the firmware, then the Personal 

Computer will read “Firmware successfully sent to the computer”� 

After receiving the new firmware, the Petrel will reset and display a message stating either 

firmware update success or failure.

Warning: During the update process, the screen may flicker or go blank for a few 

seconds�  Do not remove the battery during the upgrade process�

DEPTH   TIME   STOP  TIME

Upload

Next

 

  O

    

Upload Log

 .85    .86    .84

Summary of Contents for Petrel EXT


































































Reviews:

No comments