Page 81
Doc. 13301-Tec-RevB (2022-05-25)
Technical Modes
Operating Instructions
C) EU and UK Conformance Statements
• EU EC Type examination conducted by: SGS Fimko Oy Ltd,
Takomotie 8, FI-00380 Helsinki, Finland� Notified Body No� 0598�
• UK EC Type examination conducted by: SGS United Kingdom Ltd,
Rossmore Business Park, Ellesmere Port, South Wirral, Cheshire,
CH65 3EN, United Kingdom� Approved Body No� 0120�
• This device is in conforms with REGULATION (EU) 2016/425 on
personal protective equipment�
• High pressure gas sensing components are in conformity with
EN 250:2014 – respiratory equipment -open circuit self-contained
compressed air diving apparatus – requirements, testing and
marking – clause 6�11�1 Pressure Indicator� Pressure indication is
designed to protect a trained diver from the risk of drowning�
• EN 250:2014 is the standard describing certain minimum
performance requirements for SCUBA regulators to be used with
air only sold in EU� EN 250:2014 testing is performed to a maximum
depth of 50 M (165 FSW)� A component of self-contained breathing
apparatus as defined by EN 250:2014 is: Pressure Indicator, for
use with air only� Products marked EN250 are intended for air use
only� Products marked EN 13949 are intended for use with gases
containing more than 22% oxygen and must not be used for air�
• Depth and time measurements conform with EN 13359:2000 -
Diving Accessories - depth gauges and combined depth and time
monitoring devices
•Electronic instruments are in compliance with:
- ETSI EN 301 489-1, v2�2�3: 2019 Electromagnetic compatibility
(EMC) standard for radio equipment and services; Part 1: Common
technical requirements�
- ETSI 301 489-17 V3�2�4:2020 ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 17: Specific
conditions for Broadband Data Transmission Systems�
B) Canada - Industry Canada (IC)
This device complies with RSS 210 of Industry Canada�
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of this device�
L‘utilisation de ce dispositif est autorisée seulement aux conditions
suivantes :
(1) il ne doit pas produire d’interference, et
(2) l’utilisateur du dispositif doit étre prêt à accepter toute
interference radioélectrique reçu, même si celle-ci est susceptible
de compromettre le fonctionnement du dispositif�
Caution: Exposure to Radio Frequency Radiation.
The installer of this radio equipment must ensure that the antenna
is located or pointed such that it does not emit RF field in excess
of Health Canada limits for the general population; consult Safety
Code 6, obtainable from Health Canada’s
�
Perdix 2 Dive Computer Contains TX IC: I2208A-04
- EN 55035:2017/A11:2020 Electromagnetic compatibility of
multimedia equipment� Immunity requirements�
- CISRP32/EN 55032, 2015� A11:2020 Electromagnetic
compatibility of multimedia equipment� Emission requirements�
- DIRECTIVE 2011/65/EU Restriction of the use of certain hazardous
substances in electrical and electronic equipment (ROHS)
• Declarations of Conformity are available at: https://www�
shearwater�com/iso-9001-2015-certified/
WARNING: Transmitters marked EN 250 are certified for use with
air only. Transmitters marked EN 13949 are certified for use with
Nitrox only.