background image

  

Shaver Manufacturing Company

 

 

www.shavermfg.com 712-859-3293

Safety Instructions

BEFORE OPERATING THE STUMPBUSTER: 

 

PAY ATTENTION! 

 

 

STAY ALERT! 

 

 

 

YOUR SAFETY IS INVOLVED!

Safety is a primary concern in the design and 

manufacturing of our products.  Unfortunately our efforts 

to provide safe equipment can be wiped out by an 

operator’s single careless act.

In addition to the design and configuration of equipment, 

hazard control and accident prevention are dependent 

upon the awareness, concern, judgement, and proper 

training of personnel involved in the operation, transport, 

maintenance, and storage of equipment.

It has been said “The best safety device is an informed, 

careful operator.”  We ask you to be that kind of operator.

Training

WARNING

Read And Understand Manual 

 

Safety instructions are important! To prevent 
personal injury or even death, be sure you read 

and understand all of the instructions in this manual 
and other related OEM equipment manuals!   Also 
follow all safety sign (decal) information . 

 

 

 
This unit was designed for a specific application; 
removing stumps from the ground .  DO NOT modify or 
use this stump buster for any application other than 
which it was designed . 

 

 
Stump busters that are operated improperly or by 
untrained personnel can be dangerous; exposing 
themselves and/or bystanders to possible serious 
injury or death .  

 

 
Replacement manuals are available from your dealer, 
online at www .shavermfg .com, or if you live in the 
United States or Canada, you can call (712) 859-3293 .  
 
If you do not understand any part of this manual and 
need assistance, see your dealer .

STOP

Know your controls and how to stop the engine 
and attachment quickly in an emergency . 

 

Operators must be instructed in and be capable 
of safely operating this equipment, its 
attachments, and all controls . Do not allow 

anyone to operate this equipment without proper 
instructions .

WARNING

Keep hands and body away from pressurized 
lines . Use paper or cardboard, not hands or 
other body parts, to check for leaks . Wear safety 

goggles . Hydraulic fluid under pressure can easily 
penetrate skin and will cause serious injury or death . 
 
Make sure that all operating and service personnel 
know that if hydraulic fluid penetrates the skin, it must 
be surgically removed as soon as possible by a 
doctor familiar with this form of injury or gangrene, 
serious injury, or death will result . CONTACT A 
PHYSICIAN IMMEDIATELY IF FLUID ENTERS THE 
SKIN OR EYES . DO NOT DELAY .

Never allow children or untrained persons to 
operate equipment . 

 

Preparation

WARNING

To prevent possible injury or death:   

 

 

 

Always wear relatively tight 

and belted clothing to avoid 
entanglement in moving 

parts . Wear sturdy, rough-soled work shoes and 
protective equipment for eyes, hair, hands, hearing, 
and head .

Make sure shields and guards are properly 
installed and in good condition .  Replace if 
damaged . 

Make sure the stump buster is 
properly attached to the unit, 
adjusted properly, and in good 

operating condition .

The unit must be equipped with a ROPS or 
ROPS cab and a seat belt .  Keep the seat 
belt securely fastened .  Falling off the 

power unit can result in death from being run over or 
crushed . Keep the foldable ROPS systems in the 
“locked up” position at all times .

Inspect the area and remove stones, branches, 
or other hard objects that might be thrown, 
causing injury or damage .

Consult the local utilities before digging .  Know 
the location of and avoid contracting all 
underground cables, pipelines, overhead wires, 

and other hazards in the digging area .

Summary of Contents for SC-30H





















Reviews: