Shaun White D6 SPORTS, Owner'S Manual

Page: 69 / 75

C.) Removing a Bolt-On Rear Wheel
1.) Open/undo the rear brake.
2.) Loosen the axle nuts on the wheel.
3.) Slide the wheel forward in the axle slot and while the chain has some slack to it,
remove the chain from the
freewheel/cassette.
4.) Pull the rear wheel out of the frame.
D.) Installing a Bolt-On Rear Wheel
1.) Insert the rear wheel all the way up in the axle slot of the frame.
2.) Place the chain on the freewheel/cassette and chainring/sprocket.
3.) Pull the rear wheel back so the chain is properly tensioned.
3.) Pull the rear wheel back so the chain is properly tensioned.
4.) While pulling the rear wheel back, hold the wheel so that it is centered and tighten
the axle nuts as tight as you can.
5.) Close/re-engage the rear brake
6.) Lift the rear wheel off the ground and spin the wheel to make sure that it is centered
and clears the brake and frame.
68