USM 635 en
14
2011
-08
-25
5
Maintenance / replacement of diamond
grinding wheels.
5.1 Changing of diamond wheels.
Separate SharpX from electrical
power supply system before start-
ing any maintenance work!
1.
Turn the handle anti-clockwise until it stops.
2.
Carefully remove complete wheels with hand-
le.
3.
Remove lock washer on grinding wheel. Cau-
tion: it may jump out.
4.
Remove interlocking grinding wheel without
using force.
5.
Remove lock washer on grinding wheel. Cau-
tion: it may jump out.
6.
Remove interlocking grinding wheel without
using force.
7.
Slide new grinding wheel with
rubber ring on
to the shaft. Green side of the grinding wheel
must point in direction of handle.
8.
Use the lock washer to lock the diamond
wheel back into position. Remove the rubber
ring.
9.
Carefully re-install complete shaft with wheels
and handle.
10.
Pay attention to position of square shaft in
the coupling. Turn the handle clockwise until
stops.
11.
Do not stand directly in front of grinding
wheels during first start-up of machine. Small
parts can swirl around.
1-2
3
5
8
