- 4 -
1. Turn the Mode Selecting Dial on each blaster to Target Mode.
2. Turn both blasters on using the On/Off switches located on the underside of the blaster barrels.
3. Turn the projector on by selecting a difficulty level (180° is easy, 360° is hard).
4. Place the projector in the center of a dark room.
5. Press and hold the RESET button for three seconds on each blaster to sync them with the projector.
Release the button when you hear a quick, consecutive beeping sound.
6. Press the Start button on the projector (both buttons work; press either one to start the game).
7. The projector will project 36 consecutive meteor images randomly around the room.
8. Press the Reload button at the bottom of the blaster to start shooting.
9. Aim the blaster at a meteor and pull the trigger. The blaster will make a “woohoo” sound if you
hit a meteor and a “boing” sound if you miss.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received.
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet or on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. **This device and its antenna
must not be co-located or operating in conjunction with any other antenna or transmitter.
WARRANTY/CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. If you have any questions not covered in this guide, please call our Customer
Service department at 1 (877) 210-3449. Customer Service agents are available Monday through
Friday, 9:00 a.m. to 6:00 p.m. ET.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
