Sharper Image SC051, Instructions Manual, Page: 14 / 20

Measuring Height On The Scale
During MODE 2 and MODE 4, height measurements can be
taken while standing on the scale directly or standing on the
floor. To activate the scale, step once on the glass platform, then
release. The voice speaker states “Please wait.” The LCD cycles
between “
” “UU”. Do not step on the scale again until the
LCD cycle is completed. To measure height, stand on the scale
and place the wireless alignment board horizontally on top of
your head, extending over the scale’s ultrasonic window. The
voice speaker states: “Now, start measuring your height. Please
stand upright.” Two short beeps followed by one long beep sig-
nals the measurement is complete. The height measurement
appears on the LCD and is reported through the voice speaker.
For example, if your height is 5' 10", you will hear: “Your height
is five feet ten inches.”
Measuring Height From The Floor
To measure height standing on the floor, stand in front of the
scale and place the wireless alignment board horizontally on top
of your head, extending over the scale's ultrasonic window.
The voice speaker states: “Now, start measuring your height.
UU
Operation
14