- 2 -
CONTENTS
1. Filler cap
2. Filler hole
3. Treat reservoir
4. Treat funnel hole
5. Treat funnel
6. Auger cover
7. Candy auger
8. Main body
9. Treat chute
10. LED light
11. Spout
12. Motion sensor
13. Base
14. Auger gear
15. Drive gear
16. Power/Serving size switch
17. Battery compartment cover
18. Battery compartment
FEATURES
• Party-sized treat reservoir
• Touch-free operation
• 4 serving sizes
• Battery operated
DISASSEMBLY INSTRUCTIONS
1. Make sure the power/serving size switch is in the OFF position.
2. Remove the filler cap.
3. Remove the treat reservoir by twisting (rotating) left and lifting up.
4. Remove the treat funnel by lifting upwards.
5. Remove the auger cover by lifting upwards.
6. Remove the candy auger by lifting upwards.
7. Perform these steps in reverse to reassemble.
CLEANING INSTRUCTIONS
1. Empty remaining treats from the reservoir.
2. Disassemble according to the disassembly instructions above.
3. Remove the candy auger, auger cover, treat funnel, treat reservoir, and filler cap.
4. Hand wash with mild soap.
5. Dry completely with a soft towel.
6. Use a damp cloth to wipe any excess candy residue from the chute, spout, and body. Be
very careful to wipe only these areas. Do not get any moisture on the circuitry, motor, or
motion sensor in the spout. Dry area completely with a soft towel.
7. Once all parts are completely dry, reassemble.
8. Parts are
NOT
dishwasher safe.
