- 3 -
ASSEMBLY INSTRUCTIONS
1. Assemble Casters (7) through the holes on the Side Tray Frame (4) and secure in place using
Sleeve Nuts (10). Tighten securely using a hex key.
2. To assemble the magnetic Side Trays, inset Bolt (13) through Washer (16) and Side Tray Frame
and into the Body Frame (2).
3. To assemble the Tool Holder Shelf (5), screw the Bolt (14) through the holes in the Shelf and
into back side of the body.
Note:
The Side Tray Frames can fold up and be secured to the seat
body using the Buckles (9).
SPECIFICATIONS
Load Capacity 300 Ibs.
Frame Material
Steel Construction
Caster Size
2.5 in.
Number of Casters
4
SAFETY INFORMATION
WARNING!
Please read and understand all instructions before using this tool. The operator must
follow basic precautions to reduce the risk of personal injury and/or damage to the device.
• Use this device for its intended purpose only.
• Do not modify this device. Follow the instructions carefully.
• Do not operate this or any tool under the influence of drugs or alcohol.
• Always wear eye protection when using tools.
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. If you have any questions not covered in this guide, please call our Customer
Service department at 1 (877) 210-3449. Customer Service agents are available Monday through
Friday, 9:00 a.m. to 6:00 p.m. ET.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
