Setting the time on screen
During video playback, your device will show the recording time in
the lower right corner of the video. Please set time as follows:
1. Insert the user manual CD into the computer.
2. Open the file: update time tool V2.0.
3. Click the file, then the time of the Motion Activated Camera
Desk Clock will be synchronized with your computer.
ATTENTION
1. When recording, if the power is low, the red light flashes
quickly three times, the system will save the video first, then
turn off automatically.
2. When there is not enough memory left, the device will
automatically delete the oldest files and continue recording.
3. When taking video continually, the system will automatically
generate a new video file after every operation.
4. For optimal video performance, record in a well-lit
environment, keep the camera vertical and stable, and keep a
proper distance from the scene you want to record in order to
achieve the best effect.
5. The time it takes for computers to recognize this device
varies. Please be patient while your computer recognizes this
device. If the computer can’t identify your device, please make
sure your operating system, drivers and USB interface cable
are in good working order, then try to connect again.
6. For best playback, you may have to drag the files onto your
computer, and then open them from your computer.
Note: As with many high-tech devices, it may take a little time
to get familiar with the Motion Activated Camera Desk Clock.
Please take a few minutes to read these instructions and
practice using the device. Before long, you’ll be an expert! Be
sure to save these instructions for future reference.
