Printed in China.
3
Replacing Propellers
1. Pull firmly to remove broken propeller. Replace
with a new one. Push firmly and carefully.
2. Replace propellers by following the diagram on
the right.
3. Each blade spins differently. Blade A1 turns
clockwise and Blade B1 turns counter clockwise.
Connect the Charge
Cable to the Drone
CHARGING BATTERY
Note: The Battery Charger will light up when it is
charging the battery and turn off when the
battery is fully charged. Charge time is
approximately 120 minutes.
1. Turn off the drone before charging.
2. Connect the Battery Charger Cable to the
port found on the side of the drone.
3. Connect USB connector to the power source.
Insert the
Charge Cable
into a power
source
Fly+Drive Drone — 5-inch
A1
A1
B1
B1
