.
Turn off the SECRET function on both the transmitter and
the receiver before mode transfer.
l
If the amount of memory available on the receiver at the
time of transfer is insufficient, data transfer is not possible.
The message “MEMORY FULL” appears. Delete any
unnecessary data, verify whether the available memory is
sufficient, and repeat the data transfer procedure.
.
If an error message appears while transferring data, press
to clear the error.
Transferring backup
d a t a
All the contents of the Organizer are transferred. During
backup data transfer, data stored on the receiver is deleted.
Proceed with caution. (Backup data transfer is only possible
between identical models.)
1. To select the data transfer function on the receiver and set
it in the receive mode for backup data transfer,
Press (MENU)
2
2.
Press
2
1 Y.
Verifying
data
It is possible to verify data by mode by mode or entry. If any
discrepancies are found, the message “VERIFY ERROR” is
displayed.
To verify data in the SCHEDULE mode,
2. To select the data transfer function on the transmitter and
perform backup data transfer,
26
Select the mode on the transmitter and the receiver.
l
Press
then
(Transmitter)
l
Press
(Receiver)
Press (MENU),
2 then 3 to set the receiver in the verify
mode.
U N I T T O U N I T
- V E R I F Y I N G -
Press
then 2 to select the data transfer function
on the transmitter.
Press 1 to perform verification.
