Sharp YC-GG02E, User Manual

Page: 18 / 180

INSTALLATION
Remove all packing materials from the inside of the oven
cavity and remove any protective fi lm found on the micro-
wave oven cabinet surface.
1.
Check the oven carefully for any signs of damage.
2.
Place the oven on a secure, level surface, strong enough
to take the oven weight, plus the heaviest item likely
to be cooked in the oven. Do not place the oven in a
cabinet.
3.
Select a level surface that provide enough open space
for the intake and/or outlet vents. See picture on the
fi rst page.
The rear surface of appliance can be placed against a wall.
• The minimum installation height is 85 cm.
• A minimum space of 20 cm is required between the sides
of the microwave oven and any adjacent walls or objects.
• Leave a minimum space of 30 cm above the oven.
• Do not remove the feet from the bottom of the oven.
• Blocking the intake and/or outlet openings can damage
the oven.
• Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to
your radio or TV reception.
INSTALLATION
20 cm
30 cm
20 cm
0 cm
min
85 cm
4.
Securely connect the plug of the oven to a standard
earthed (grounded) household electrical outlet.
WARNING:
Do not place the oven where heat, moisture or
high humidity are generated, (for example, near or above
a conventional oven) or near combustible materials (for
example, curtains).
Do not block or obstruct air vent openings.
Do not place objects on top of the oven.
Do not touch the exterior of the microwave oven during or
shortly after operation as it will be hot.
EN-16 EN-16