background image

E-38

Basic Operation

Selected item

Theater Mode Functions

Function as a toggle switch for controlling the quantity
of projected light. Select “NORMAL” or “BRIGHT” to
decrease or increase brightness, power consumption
and fan noise.
This function can be operated using the 

THEATER

MODE

 button on the remote control, as well as the GUI

menu screen.

Description of Theater Modes

Operating the Theater Mode Function with
the Remote Control

1

Press 

THEATER MODE

 on the remote control.

The present Theater Mode is displayed.
“ 

 ” disappears after four-seconds of

no-operation.

• “Theater Mode” is factory preset to “BRIGHT” .
• When selecting “BRIGHT” in “Theater Mode”, the fan noise

is increased.

• Even when selecting “NORMAL” in “Theater Mode“, fan

noise may increase if internal temperature rises enough to
activate the cooling function.

Operating the Theater Mode Function Using
the GUI Menu Screen

1

Press 

MENU

.

2

Press 

/

 to select “Options”.

3

Press 

/

 to select “Theater Mode”.

4

Press 

/

 to select “

” or “

”.

5

To exit the GUI, press 

MENU

.

Quantity of light is 70%.
Power consumption is 310 W.

Quantity of light is 100%.
Power consumption is 365 W.

1

On-screen Display

(GUI) On-screen Display

1

,

5

2

,

3

,

4

Description

NORMAL (

)

BRIGHT (

)

Summary of Contents for XV-Z9000U - Vision - DLP Projector






























































Reviews: