-18
Setting Up the Projector
Projecting a Reversed Image
Projection from behind the Screen
■
Place a translucent screen between the projector and the audience.
■
Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page
52
.)
Projection Using a Mirror
■
Place a mirror (normal flat type) in front of the lens.
■
When the translucent screen is placed between the mirror and audience, set to “Front” in the “PRJ Mode”
menu. (See page
52
.)
■
When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See page
52
.)
Info
•
When using a mirror, ensure to carefully position both the projector and the mirror so the light does not
shine into the eyes of the audience.
Ceiling-mount Setup
■
It is recommended that you use the optional Sharp ceiling-mount
bracket for this installation.
■
Before mounting the projector, contact your nearest Sharp
Authorised Projector Dealer or Service Centre to obtain the
recommended ceiling-mount bracket (sold separately). (AN-
TK202 ceiling-mount bracket, AN-TK201 extension tube, AN-
60KT ceiling adaptors for AN-TK202 or AN-TK201)
■
Invert the image by setting “C Front” in “PRJ Mode”. See
page
52
for use of this function.
Translucent screen
Audience
Set to “Front”
Audience
Translucent screen
Mirror
Set to “Rear”
Audience
Mirror
XV-Z2000E_E_P16_18.p65
2004.10.20, 11:51 AM
18
