7
XL-MP80E
04/3/25
XLMP80E_A_1.fm
TINSEA024SJZZ
P
reparati
on f
o
r Use
Remote control
"
Battery installation
Precautions for battery use:
!
Replace all old batteries with new ones at the same time.
!
Do not mix old and new batteries.
!
Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leak-
age.
Caution:
!
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
!
Installing the batteries incorrectly may cause the unit to malfunc-
tion.
Notes concerning use:
!
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
!
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
!
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
!
Keep the remote control away from moisture, heat, shock, and
vibrations.
"
Test of the remote control
Check the remote control after checking all the connections (see
pages 8 - 9).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
1
Remove the battery cover.
2
Insert the supplied batteries according to the direction indi-
cated in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3
Replace the cover.
0.2 m - 6 m
(8" - 20')
Remote sensor
2
