03/8/20
XL-MP45H(H)E2.fm
E-18
ENGLISH
8
XL-MP45H
TINSZ0227SJZZ
Tape
Recordi
n
g
Recording on a cassette tape
Before recording:
"
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
"
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
"
The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
"
For recording, use only normal tapes. Do not use metal or
CrO tapes.
"
Do not use C-120 tapes or poor-quality tapes, as they may cause
malfunctions.
!
Recording from a CD or MP3 disc
To perform programmed recording:
To stop recording:
Press the button.
The disc and tape will stop.
To interrupt recording:
Press the
button.
"
Recording is paused, but disc playback will continue.
To resume recording, press the
( ) button.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "CD" appears on the dis-
play.
When operating with the remote control, press the CD button.
3
Load the desired disc.
4
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
5
Press the
button.
Recording will be paused.
6
Press the
( ) button to start re-
cording.
"
Playback of the disc will start in a few seconds after the tape
starts.
"
When the playback of the disc is finished or the end of the
tape is reached, the disc and the cassette will stop automat-
ically.
1 Programme tracks (see page 14).
2 Press the
button.
3 Press the
( ) button.
