background image

XL-MP15H AUS 01-16.fm

11

2009June11

MP3/WMA folder mode (only for MP3/WMA files)  

To play back MP3/WMA (Windows Media Audio) file

There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files. Follow the
instructions from the website on how to download from the music
files.
You can then play back these downloaded music files by burning
them to a CD-R/RW disc.

Your downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.

If MP3/WMA files are recorded in several folders, a folder number
will be set to each folder automatically.

These folders can be selected by the TUNING/FOLDER (

 or 

)

button on the remote control. If there is no supported file formats
inside the selected folder, the folder is skipped and the next folder
will be selected.

Example: How to set folder number if MP3/WMA format files are
recorded as below figure.

* The folder and file order information which is recorded on the disc
depends on the writing software. There maybe possibilities that this
unit will playback the files not according to our expected playback
order.
All the files inside the selected folder will be played back.
In case Folder D is selected, file 4, 5 and 6 will be played back. File
7 and 8 in Folder E will not be played back.

To playback CD-R/RW.

Note:

If “NO DISC” is displayed, it means “Copyright protected WMA file”
or “Not supported playback file” is selected.

About folder playback order

1

ROOT folder is set as folder 1.

2

As for folders inside ROOT folder (Folder A and Folder B), the
folder which is recorded earlier on the disc will be set as folder 2.

3

As for folder inside Folder A (Folder C and Folder D), the folder
which is recorded earlier on the disc will be set as folder 3.

4

Because there is no folder in Folder C, Folder D will be set as
folder 4.

5

Folder E that is inside Folder D will be set as folder 5.

6

Folder B inside ROOT folder will be set as folder 6.

ROOT
(FOLDER 1) 

FOLDER A
(FOLDER 2)

FOLDER B
(FOLDER 6)

FILE 7
FILE 8

FILE 1
FILE 2
FILE 3

FILE 4
FILE 5
FILE 6
FOLDER E
(FOLDER 5)

FOLDER C
(FOLDER 3)

FOLDER D
(FOLDER 4)

FILE 9
FILE 10

Procedure to playback MP3/WMA disc

1

Press the CD button, and load a MP3/WMA disc.

After disc is loaded, the disc info will be displayed.

In case in folder mode, proceed to step 2.

In case track is selected, proceed to step 3.

2

Press the TUNING/FOLDER (

 or 

) button to select desired

playback folder.

It will playback in the 1st track of the selected folder when 

/   (CD 

/ ) is pressed.

3

Select desired track to be played back by pressing the 

 or 

 button.

4

Press the /  

(CD / ) 

button and playback will start.

Press the MEMORY/DISP button to display Title, Artist and
Album name if it is recorded on the disc.

To cancel the display of Title, Artist and Album name, press
the MEMORY/DISP button until track number appear.

Title, Artist and Album name will scroll through the display as
follows.

 MP3 ID3-Tag only support version 1.x.

Total number 
of tracks

Total number 
of folders

Track number

Title

Artist

Album

Summary of Contents for XL-MP15H





















Reviews: