manualshive.com logo in svg

Sharp XL-MP110DVD, Operation Manual

Share
Download
Sharp XL-MP110DVD Operation Manual Download Page 45

XL-MP110DVD

44

V

ideo CD/CD Playback

To exchange to other disc whilst playing:

Press one of the 

s

 

1

 - 

s

 

5

 buttons of the stopped disc and within 5 seconds,

press the 

7

 OPEN/CLOSE button and exchange discs.

To remove the discs:

Whilst in the stop mode, press the 

s

 

1

 - 

s

 

5 

buttons and within 5 seconds,

press the 

7

 OPEN/CLOSE button.

Note:

I

Default setting for video CD is P.B.C. OFF.

Caution:

I

Do not place two discs in one disc tray.

I

Do not play discs of special shapes (heart, octagon, etc.). It may cause
malfunctions.

I

Do not push the disc tray whilst it is moving.

I

Do not move the disc tray by hand. This may cause malfunctions.

I

If the power fails whilst the tray is open, wait until the power is restored.

I

If the disc tray is stopped with force, “ER-CD20” will appear on the display
for 3 seconds and the unit will not function. If this occurs, press the ON/
STAND-BY button to enter the power stand-by mode and then turn the
power on again.

I

If TV or radio interference occurs during CD operation, move the unit away
from the TV or radio.

I

If a disc is damaged, dirty, or loaded upside down, the disc will skip or not
play back.

I

If the picture looks dirty when a video CD is played back, there may be a
scratch on the video CD. Replace it with another video CD in good condition.

H

To playback Video CD with P.B.C. function.

Playback control:

Video CDs that support “Playback control” can display still pictures. This function
can be used with video CD software (video CDs with playback control) that have
a playback method recorded on them. You can select items you want to watch
from the menu displayed on the TV screen, or you can show still pictures.

I

Press TOP MENU button in remote control whilst in stop or playback mode.

Notes:

I

Playback control allows a video CD to be played back according to
instructions recorded on the disc. The “previous”, “next”, “return” and “select”
operations may function differently, depending on the P.B.C. CDs.

I

Some video CDs with playback control may have an “auto pause” recorded
on them. When such a disc is played, the screen will stop automatically at
the point where an “auto pause signal” has been inserted.

I

“

2 4

 PRESET

  W

” and “

5 3 

 PRESET

  X

” button is invalid during

STOP whilst VCD disc in P.B.C ON mode.

I

The P.B.C. function also can be cancelled whilst in the playback mode by
pressing TOP MENU button in remote control.

I

Some video CDs with P.B.C. cannot be played back when the P.B.C. mode
is off.

XL-MP110DVD(EN)42-45

4/28/05, 8:46 AM

44

Summary of Contents for XL-MP110DVD









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands