manualshive.com logo in svg

Sharp XL-MP110DVD, Operation Manual

Share
Download
Sharp XL-MP110DVD Operation Manual Download Page 17

XL-MP110DVD

16

Preparation for Use

Remote control

H

Battery installation

1

Open the battery cover.

2

Insert the supplied batteries according to the direction indicated in
the battery compartment.

When inserting or removing the batteries, push them towards the 

d

 battery

terminal.

3

Replace the cover.

Precautions for battery use:

I

Replace all old batteries with new ones at the same time.

I

Do not mix old and new batteries.

I

Remove the batteries if the unit is not be used for long periods of time. This
will prevent potential damage due to battery leakage.

Caution:

I

Do not use rechargeable batteries (nickel-cadmium battery, etc.).

I

Installing the batteries incorrectly may cause the unit to malfunction.

Battery removal:

Open the battery cover and pull up the battery to take out.

Notes concerning use:

I

Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or
similar).

I

Periodically clean the transmitter on the remote control and the sensor on
the unit with a soft cloth.

I

Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.

I

Keep the remote control away from moisture, heat, shock and vibrations.

H

Test of the remote control

Check the remote control after checking all the connections have been made
correctly. (See pages 10 - 15).
Point the remote control directly at the remote sensor on the unit.

The remote control can be used within the range shown below:

Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy
music.

/

Remote sensor

XL-MP110DVD(EN)10-16

4/28/05, 8:33 AM

16

Summary of Contents for XL-MP110DVD









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands