Sharp XL-HP500H Operation Manual Download Page 35

Page: 35 / 40

02/7/23

XL-HP500H(H)E3.fm

E-28

ENGLISH

XL-HP500H

Advanc

d Featu

res

To record on a tape

Headphones

Before plugging in or unplugging the headphones, reduce the
volume.

Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.

Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.

Subwoofer connection

When a commercially available speaker with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER socket.

Insert a cassette in the cassette compartment.

Press the VIDEO/AUX button.

Press the

button.

Press the / ( ) or button.

Play the VCR, DVD, etc.

Speaker with a
built-in amplifier

Summary of Contents for XL-HP500H









































Search results

Summary of Contents for XL-HP500H

Reviews:

Related manuals for XL-HP500H

Brands by name

Popular brands

Sharp XL-HP500H, Operation Manual

Search results

Summary of Contents for XL-HP500H

Reviews:

Related manuals for XL-HP500H

Brands by name

Popular brands