E-18
EN
Timer and sleep operation (Remote control only) (continued)
11
Press the ON/STAND-BY button to enter the power
stand-by mode. “TIMER” indicator lights up.
12
When the preset time is reached, playback will start. The
volume will increase gradually until it reaches the preset
volume. The timer indicator will blink during timer play-
back.
13
When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every selected
day. Cancel the daily timer when it is not in use.
Notes:
●
When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack, se-
lect “USB” or “AUDIO IN” or “LINE IN” in step 5. This
unit will turn on or enter the power stand-by mode au-
tomatically. However, the connected unit will not turn
on or off.
●
To stop the timer playback, follow step “
Cancelling
the timer setting
” of this page.
Checking the timer setting:
1
Turn the power on. Press and hold the CLOCK/TIMER
button.
2
Within 10 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3
Within 10 seconds, press the or button to select
“Timer Call”, and press the ENTER button.
Cancelling the timer setting:
1
Turn the power on. Press and hold the CLOCK/TIMER
button.
2
Within 10 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3
Within 10 seconds, press the or button to select
“Timer Off”, and press the ENTER button. Timer will be
cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1
Turn the power on. Press and hold the CLOCK/TIMER
button.
2
Within 10 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3
Within 10 seconds, press the or button to select
“Timer On” , and press the ENTER button.
4
Press the ON/STAND-BY button to enter the power
stand-by mode.
■
Sleep operation
The radio, disc, iPod, USB, Audio In and Line In can all be
turned off automatically.
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 5 seconds, press the Numeric button to set the
time. (1 minute ~ 99 minutes)
4
“SLEEP” will appear.
5
The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1
While “SLEEP” is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button while “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
1
While “SLEEP” is indicated, press the SLEEP button.
2
Within 5 seconds, press the “0” button twice until
“SLEEP 00” appears.
■
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD the next morning.
1
Set the sleep time (see above, steps 1 - 5).
2
While the sleep timer is set, set the timer playback
(steps 2 - 9, page 17).
Sleep timer
setting
Timer playback
setting
Desired time
1-99 minutes
Sleep operation will
automatically stop
Timer playback start
time
End time
