Sharp XL-3600 Service Manual Download Page 35

Page: 35 / 52

– 35 –

XL-3600

XL-3700/C

Make sure that the disc is normal, and set the CD TEST MODE (STEP 1).

Is the measured voltage as specified in circuit diagram?

Check the main unit power supply circuit.

Yes

Is "Er-CD01" displayed"?

Yes

Move the pickup to most internal circumference side of disc.
Turn the power off and reset the CD TEST MODE (STEP 1).
Is "PU ERROR " not displayed?

Yes

Check the PWB pattern between pin 65 (CD_RES) of IC701 and
pin 63 (RST) of IC801.

Is +5V applied to pin 63 (RST) of IC801?

Yes

Is CD Lid switch SW802
ON condition ?

Does the CD TEST MODE advance from "STEP 2"?

Yes

Check the between pattern IC701 and SW802 If OK.
Check the main unit power supply circuit.

Does the laser come on in CD TEST MODE "STEP 2"?

Check the procedure in "LASER FAILURE".

Yes

Does the CD TEST MODE advance from "STEP 3" to "STEP
4"?

Check the procedure in "FOCUS FAILURE".

Yes

Does the spindle motor rotate normally when the CD TEST
MODE changes from "STEP 4" to "STEP 3"?

Yes

Is the HF output on pin 24 of IC801 in CD TEST MODE "STEP 5"?

Check the procedure "HF ERROR".

Yes

Check the pattern between pin 58 (PU_IN) of IC701 and
CNW704/CNP704.
Check the between CNW704/CNP704 and PU-IN switch.

Set ON condition the CD
Lid switch.

Check the procedure in "SPINDLE MOTOR CLV SERVO
FAILURE".

Does the sled motor
move ?

Does the sound heard when the optical pickup move to the
selected play by the FF

/REW

key.

Check the procedure "NO SOUND"

Yes

Check the procedure in
"SLED MOTOR
OPERATING FAILURE ".

Does the LCD track number and time indicator work properly ?

Check the pattern between IC701 and LCD701.

Yes

Is "Er-CD01 "
displayed ?

Turn the power off and then back on.
Does the unit initialize properly and start playback when PLAY
key is pressed?

Check the pattern between pin 58 (PU_IN) of IC701
and CNW704/CNP704. Check the between CNW704/
CNP704 and PU-IN switch.

Yes

Check the procedure in
"HF ERROR".

Yes

Does the unit play in order in the FF mode?

Check the procedure in "TRACK SEARCH FAILURE".

Yes

Does playback continue for 30 seconds after the start of
playback ?

Check the procedure in "SLED SERVO FAILURE".

Yes

Normal

Yes

Summary of Contents for XL-3600





















































Search results

Summary of Contents for XL-3600

Reviews:

Related manuals for XL-3600

Brands by name

Popular brands

Sharp XL-3600, Service Manual

Search results

Summary of Contents for XL-3600

Reviews:

Related manuals for XL-3600

Brands by name

Popular brands