When the Projector Name option appears, you will notice that the "ID" number and the
port connection type is already identified. The SAPS software is reading the information
previously identified through the "Projector Setting" from the "File" menu option. (Refer to Figure 6)
For this example we are going to call our unit "Sharp's Unit". After entering the projector name,
depress the apply button which at this time will become active. Then depress the "OK" button.
Your unit now has a "Projector Name". This name can be anything to help the
Administrator identify the projector and or placement of the Unit. For example,
the projector could have been called "3rdFl ConRm" or " Cafeteria" depending on the
physical layout and or number of projectors involved. (Refer to Figure 10)
NOTE: the "Projector Name" field is limited to 12 Characters Maximum.
NOTE: the SAPS software can control up to 250 individual or grouped projectors.
Please refer to your SAPS operation manual for further details on grouping projectors.
Figure 10
After a "Projector / Unique Name" has been completed the changes will be reflected in the
All projector List" on the bottom of the "Multiple Projector" screen. (Refer to Figure 11)
Figure 11
L:\tekcentr\CACTrain\SPS_ntwk
14
10/16/2001
