Sharp XG-MB70X, Service Manual

Page: 12 / 161

12
XG-MB70X
Projector (Rear View)
Using the Kensington Lock
•
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
INPUT 1 terminal
Terminal for computer RGB
and component signals.
Rear adjustment feet
Intake vent
INPUT 2 terminal
Terminal for computer RGB
and component signals.
AUDIO OUTPUT terminal
Audio output terminal of
equipment connected to the
AUDIO INPUT terminal.
AUDIO INPUT 1, 2 terminal
Shared audio input terminal
for INPUT 1 and 2.
OUTPUT (INPUT 1, 2) terminal
Shared computer RGB and component
signals output terminal for INPUT 1 and 2.
Terminal for connecting a monitor.
INPUT 3 terminal
Terminal for connecting
video equipment.
INPUT 4 terminal
Terminal for connecting
video equipment with an
S-video terminal.
AUDIO INPUT 3, 4 terminal
Shared audio input terminal
for INPUT 3 and 4.
USB terminal
RS-232C terminal
Terminal for controlling
the projector using a computer.
Remote control sensor
Exhaust vent
The speed and pitch of
the cooling fan may
change during operation
in response to internal
temperature changes.
This is normal operation
and does not indicate a
malfunction.
AC socket
Connect the supplied
Power cord.
Kensington Security
Standard connector
LAN terminal
Terminal for controlling the
projector using a computer via
network.
Terminals Refer to “INPUT/OUTPUT Terminals and Connectable Main Equipment”