41
Dimension: 140mm x 215mm
Operation of Universal Remote Control
•
Universal Remote Control
With the purchase of your television set you
also have received the latest innovation in
remote control technology. With its easy-to-use
push button keyboard, your Remote can control
your television set and most infrared remote
controlled VCRs, cable TV converters and
DVDs as well.
Note:
• Depending on the model, year produced, brand
and type of VCR, cable TV converter and DVD,
some models may not be compatible with the
remote control.
• Some brands may not enable channel selection
until the
ENTER
button is pressed.
Example:
When you select channel 24,
(1) Press
REMOTE KEYPAD
“2”.
(2) Press
REMOTE KEYPAD
“4”.
(3) Press
ENTER
.
For detailed information on the use of the Cable
TV converter Box refer to their operating
manuals.
•
Using Your Remote With Your TV
After installing the batteries, press the
TV/VCR
on the remote to select the TV mode. (If you
can change the channel of the TV by pressing
CH UP (
8
)
or
DOWN (
9
)
on the Remote
Control, it is the TV mode.)
•
“Identifying” Remote VCRs, cable TV
conveters and DVDs
Your Remote Control has been set at the factory
to operate your TV and many remote control
VCRs, cable TV conver ters and DVDs.
However, in some cases an easy one-time set-
up step may be necessary before the Remote
will operate accessory VCRs, cable TV
converters and DVDs.
• In this set-up step, the Remote locates and
memorizes the remote control transmitter code
for the VCR, cable TV converters and DVDs.
• Once “identified”, the Remote sends the proper
remote signals to operate your accessory.
• This identify step will not have to be repeated
until power to the Remote is interrupted due to
a battery failure.
•
Using your remote control with a VCR
Once you make certain the Remote Control has
“identified” your remote controlled VCR or DVD,
the Remote Control is ready to operate your
unit. The various VCR or DVD function buttons
on the Remote Control will not operate your
VCR or DVD if those features are not already
found on your unit.
• All VCR buttons will operate whether the
Remote Control is in TV or VCR modes.
• For detailed information on the use of the VCR
or DVD, refer to the operation manual of the
VCR or DVD.
3
2
1
6
5
4
9
8
7
100
0
TV • CATV • VCR • DVD
A
B
C
D
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY
CATV
INPUT
TV
DVD
VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU
MUTE
g
SKIP
f
PLAY
-
Press to playback a tape or disc.
POWER (DVD/VCR)
Press to turn the VCR or DVD on and
off.
REWIND
3
Press to rewind a tape or reverse a
disc. For some VCRs or DVDs you
may need to press STOP first, then
REWIND.
STOP
L
Press to stop the tape or disc.
PAUSE
J
Press to temporarily stop the tape or
disc during playback or recording (VCR
only).
Press again to release Pause.
REMOTE KEYPAD
Use to enter two-digit code numbers
when identifying your VCR.
ENTER
VCR CHANNEL UP (
8
)/DOWN (
9
)
Press to scan up or down through
channels on the VCR.
DVD SKIP
Press to jump forward to the beginning
of the next chapter/track, or backward
to the beginning of the current chapter/
track, and automatically start to play
that chapter/track.
FF
2
Press to rapidly advance the tape or
disc. For some VCRs or DVDs, you
may need to press STOP first, then
FF.
20F650[40-43].p65
9/12/04, 1:44 PM
41
