XEA147BK and XEA147WH Frequently Asked Questions Page 15 of 21
How do I enable copy receipts?
9.
Set the mode key to the Z/PGM position
10.
Enter:
#/TM/ST
6 3
_
/
RCPT/SW 0
1 0
_
1
_
0
0 0 1
#/TM/ST
TL/AT/NS
How do I stop the receipt printing after each sale?
1.
Turn the mode key to REG
2.
Ensure no sale is in progress by pressing
TL/AT/NS
3.
Press
_
/
RCPT/SW
_
This key toggles the receipt printing from ON to OFF or OFF to ON
Press the
_
RCPT/RA
_
key to print a receipt after the sale if required. If there are more than 40
items in the sale, the receipt will print the total of the sale only.
How shall I know when it is time to replace the batteries?
The XEA147 has a “Low Battery” symbol which is:
, and a “Flat Battery/No Battery” symbol which
is:
When the “Low Battery” symbol is displayed, you should replace the batteries with new ones within two
days of the low battery symbol being first displayed. Failure to do so will mean that the XEA147 might
lose its programmed settings and any sales data in the event of a power failure.
When the “Flat Battery/No Battery” symbol is displayed the battery must be replace immediately. If not
the XEA147 will lose all its programmed settings, and any sales data if the power fails or is turned off.
