manualshive.com logo in svg

Sharp X-70H, Operation Manual

Share
Download
Sharp X-70H Operation Manual Download Page 29

28

HOW TO USE THE BUILT-IN TIMER

■

 Timer playback

TIMER

4,5,6

2,5,6

1

3

2

6

Turn the jog dial to set the minute at which to
start, and then press the MEMORY/SET but-
ton.

●

The timer playback starting time, function, and
volume will be displayed, and then the unit will
enter the stand-by mode automatically.

●

“

f

” will appear and the current time will be dis-

played.

7

When the preset time is reached, the volume
will increase gradually.

8

If you select CD or TAPE in the timer operation,
the unit will enter the stand-by mode after the
playback. If you select TUNER or AUX, it will
enter the stand-by mode one hour after the timer
playback starts.

Caution:

●

Timer recording is not possible.

●

Recording operations are not possible during
timer playback.

To confirm the timer setting:

Press the CLOCK/TIMER/SLEEP button on the
main unit twice or press the TIMER button on the
remote control once.

●

The timer playback starting time, function, and
volume will be displayed.

●

If you press the TIMER button on the remote
control whilst confirming the timer setting (whilst
“

f

” is flashing), you can turn the timer playback

stand-by mode on or off.

To change the programmed contents:

After cancelling the timer mode, perform steps 1 -
6 above.

To cancel timer operation:

Press the ON/STAND-BY button to turn the power
on.

Notes:

●

The previously programmed timer starting time
will be stored until it is reprogrammed.

●

The timer cannot control the component con-
nected to the auxiliary input sockets.

●

Before setting the timer, make sure that the clock
setting is correct. (Page 12)

1

Press the ON/STAND-BY button to turn the
power on.

2

Press the FUNCTION button to select the de-
sired function, and then adjust the sound vol-
ume using the jog dial.

3

Press the CLOCK/TIMER/SLEEP button repeat-
edly until “

f

” is displayed.

4

 Within 6 seconds, press the MEMORY/SET but-

ton.

●

If more than 6 seconds have passed, start again
from step 3.

5

 Turn the jog dial to set the hour at which to start,

and then press the MEMORY/SET button.

*60H/70H(SUK)28-32

00.1.5, 11:41 AM

28

Summary of Contents for X-70H





































Reviews:

No comments

Brands by name

Popular brands

Load more brands