10
15
15
●
When inserting or removing the batteries, push
them towards the
ë
battery terminals.
●
Installing the batteries incorrectly may cause the
unit to malfunction.
Precautions for battery use:
●
Insert the batteries according to the direction in-
dicated in the battery compartment.
●
Replace all old batteries with new ones at the
same time.
●
Do not mix old and new batteries.
●
Remove the batteries if they are weak or if the
unit will not be used for long periods of time. This
will prevent potential damage due to battery leak-
age.
Caution:
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Notes concerning use:
●
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
●
Periodically clean the transmitter LED on the re-
mote control and the sensor on the main unit
with a soft cloth.
●
Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
●
Keep the remote control away from moisture,
excessive heat, shock, and vibrations.
●
2 “AA” size batteries (UM/SUM-3, R6, HP-7
or similar)
●
Batteries are not included.
0.2m - 6m
(8” - 20”)
■
Remote control
(Continued)
■
Volume
MIN 15 MAX
(Main unit operation)
When the VOLUME control is turned clockwise, the
volume will increase. When it is turned anti-clock-
wise, the volume will decrease.
(Remote control operation)
Press the VOLUME button to increase the vol-
ume and the VOLUME button to decrease the
volume.
(Main unit)
(Remote control)
Servo Powered Volume:
●
The jog dial automatically comes out when the
power is turned on, and goes back when the unit
is set to the stand-by mode.
●
When the power is turned on, you can put the
jog dial in and out by pressing the VOLUME
SELECT button.
Note:
Do not push in the jog dial forcibly with your finger.
SOUND CONTROL
*60H/70H(SUK)08-12
00.1.5, 11:39 AM
10
