Perform steps 1 and
2
of the disassembly method to remove the
tape mechanism.
How to remove the playback, erase and record/playback
heads (See Fig. 5-l
1. Remove the two screws
to remove the playback head.
2. Remove the two screws
and shield cover
to remove
the record/playback head.
3. Remove the two screws
to remove the erase head.
Note:
Be careful not to lose the head azimuth springs.
Figure 5-l
Figure 5-3
Figure 5-3
l
How to remove the pinch roller (See Fig. 5-2.)
1. Move the pinch roller
in the direction of arrow
to remove it from the play lever.
2. Move the pinch roller spring
in the direction of arrow
@to remove it from the pinch roller unit.
3. Remove the pinch roller in the direction of arrow
,
ler
l
How to remove the drive belt
Figs. 5-3 and 5-4.)
1. Remove the four screws
to remove the flywheel bracket
and switch bracket.
2. Remove the drive belt
l
How to remove the flywheel (See Fig.
Remove the capstan metal
and pull out the flywheel.
Note:
Be careful not to lose the three washers.
How to remove the motor. (See Fig. 5-4.)
1. Remove the three screws (El) to remove the motor.
Figure 5-4
Figure 5-2
