POWERING THE
FROM
AN AC OUTLET
DC cable
light& socket
tery Adaptor/Battery
r
(optional
1
Plug the DC cable of the connecting plate sup-
plied with the AC adaptor into the DC OUT jack
on the AC adaptor.
Mount the connecting plate on the
Insert the AC plug into a wall outlet. The OPER-
ATE indicator on the AC adaptor will light.
Caution:
l
The supplied AC adaptor/battery charger
0179GEZZ) is specially designed for use with the
CAM, and should not be used as a power supply for
other camcorders,
USING THE CAR BATTERY
ADAPTOR/BATTERY CHARGER
(OPTIONAL ACCESSORY)
Insert the plug into the cigarette lighter socket.
The OPERATE indicator will light.
Plug the DC cable from the supplied connecting
plate into the DC OUT jack on the car battery
adaptor/battery charger.
Mount the connecting plate on the
The battery pack can be recharged by using the
car battery adaptor/battery charger in basically
the’same manner as the AC adaptor/battery
charger (see page
Note:
l
If you power the
from the car battery for an
extended period of time, the battery will be drained and
restarting the engine may be difficult. An average
charged car battery has a capacity of 50 ampere-hour,
which will allow 20 hours of
usage while still
leaving half the battery’s capacity.
Cautions:
l
Use in only DC 12V or 24V negative ground system cars
Positive-ground car batteries CANNOT BE USED. Check
your car operation manual or consult a local car dealer.
l
Charge only SHARP model BT-77, BT-70, BT-BH70,
80, or BT-BH85 battery packs. Other types of batteries
may burst, causing personal injury and damage.
accessory)
12
