manualshive.com logo in svg

Sharp ViewcamZ VL-Z7E, Service Manual

Share
Download
Sharp ViewcamZ VL-Z7E Service Manual Download Page 6

6

VL-Z7S/E/Z7E-A/Z7E-W
VL-Z8H

3-2. Procedure for disassembling the cabinet

VCR bottom cover

b

e

or

b

e

or

a

d

or

b

e

or

h

h

h

Tilt cover

VCR front cover

Connector

Tilt FPC

KS camera unit

b

e

or

b

e

or

f

KS VCR operating cover

Operating PWB FFC

The internal lug 
may be damaged

If the VCR front cover is removed 
only by turning it in the direction 
indicated

1. Remove the two couplings and turn the VCR front cover about 20 degrees in 
    the direction indicated by (1).
2. Turn the VCR front while sliding it in the direction indicated by (2) to disengage 
     the internal lug.
*  If the  VCR front cover is removed by turning it forcedly in the direction indicated 
    by (1), the internal lug may be damaged.

How to remove the VCR front cover

1

2

1.

· Remove the three screws Z7S/SA/R/E/EW/X/EEW/EWW/Z8H: ((b)

XiPSN17P03000) or Z7EEA/EWA: ((e) XiPSF17P03000) remove the
screw Z7S/SA/R/E/EW/X/EEW/EWW/Z8H: ((a) XiPSN17P02000) or
Z7EEA/EWA: ((d) XiPSF17P02000) and remove the VCR bottom
cover.

2.

· Remove the two screws Z7S/SA/R/E/EW/X/EEW/EWW/Z8H: ((b)

XiPSN17P03000) or Z7EEA/EWA: ((e) XiPSF17P03000) and remove
the tilt cover.

· Remove the VCR front cover with the cassette cover opened.
· Disconnect the connector and two tilt FPCs, remove the three screws

((h) LX-BZ0220TAFC) and remove the KS camera tilt.

3.

· Remove the screw ((f) XiPSF17P04000) with the cassette lid opened,

disconnect the operation PWB FFC and remove the KS VCR operating
cover.

Summary of Contents for ViewcamZ VL-Z7E


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands