Sharp ViewCam VL-NZ50E Operation Manual Download

Page: 31 / 73

Basic Operations

Remaining Battery
Power Display

When using the camcorder with the battery
pack as the power source, the remaining
battery power indicator is displayed. If the
battery power becomes very low, a warning
indicator appears. Replace the battery pack.

Notes:

•

The remaining battery power indicator
appears when the on-screen indicators are
turned on.

• Use the remaining battery power indicator only

as an approximate indication.

• The remaining battery power indicator may

change to either a higher or lower level if you set
the Power switch to OFF and then back to
CAMERA or VCR.

• In cold environments, the red remaining battery

power indicator may appear sooner.

• Use of the zoom functions when the warning

indicator is displayed may cause the camcorder
to suddenly lose power.

The tape has reached

the end.

T HE

E NDS SOON.

T A P E

T A PE E ND

CHANGE T HE

CAS SE T T E .

T A PE E ND

Warning indicator

Approx. remaining time

Less than 1 min.

3 0 min

BA T T E RY I S

T OO LOW.

Remaining Recording
Time Display

When the camcorder is recording, an on-
screen indicator displays the approximate
remaining tape time in minutes.

Notes:

•

The remaining recording time indicator
appears when the on-screen indicators are
turned on.

•

The remaining recording time indicator
appears 10 seconds after pressing the REC
START/STOP button to begin recording.

• The remaining recording time indicator only

shows the approximate time left. Also, it varies
slightly depending on the length of tape used.
(This function is based on the DVM60 tape
standard.)

When the remaining recording time reaches 1
minute, a warning indicator will appear.
Prepare a new cassette.

(Green)

Remaining recording
time indicator

Warning indicator

(Green)

(Red)

Remaining battery
power indicator

VL-NZ50E-E-016-021

02.4.8, 10:45 AM

Summary of Contents for ViewCam VL-NZ50E










































































Search results

Summary of Contents for ViewCam VL-NZ50E

Reviews:

Related manuals for ViewCam VL-NZ50E

Brands by name

Popular brands

Sharp ViewCam VL-NZ50E, Operation Manual

Search results

Summary of Contents for ViewCam VL-NZ50E

Reviews:

Related manuals for ViewCam VL-NZ50E

Brands by name

Popular brands