Sharp Viewcam VL-NZ10S Operation Manual Download Page 80

Page: 80 / 111

Advanced Features
Playback

Advanced Features

Configuring Software for
PC Connection

This camcorder can transfer still playback
images in TAPE-VCR mode or still images in
TAPE-CAMERA and CARD modes to a
personal computer by using the Video Capture
Software (only supplied with VL-NZ10).

Connecting the camcorder to a
Personal Computer

Turn off the camcorder and PC.

Connect the camcorder as shown below.

• Before connecting the camcorder to the

PC, make sure that the PC power is off
to insure that images are transferred
properly.

Turn on the PC, then turn on the
camcorder in the desired camcorder
mode.

Notes:

• It is recommended to use the AC adapter/battery

charger as a power source for extended periods
of use.

• Images with the following functions cannot be

transferred to a personal computer.
— TAPE-VCR/CARD-VCR mode: Picture Effect

Playback

— TAPE-CAMERA/CARD-CAMERA mode: Digital

Picture Effects

• Using a commercially available PC card adapter,

it is possible to directly transfer still images on a
card to a PC (see page 79).

• To edit still images transferred with the Video

Capture Software, use a commercially available
image editing software.

System Requirements

• IBM PC/AT or compatible with Intel

Pentium

133 MHz or faster processor

• Microsoft Windows

95B, Windows

95C,

Windows

98, Windows

98 Second Edition,

Windows

2000 Professional*, or Windows

operating system

• 32 MB or more of RAM
• 9 MB minimum of available hard-disk space
• SVGA (800

600 pixels) colour display monitor

with 16-bit colour or higher

• CD-ROM drive (for installation)
• RS-232C serial port
• Mouse or other pointing device

* In the Windows

2000 Professional environment,

only the system administrator has installation
access rights.

Installing the Software

Turn on the PC and start up Windows.

Insert the CD-ROM of the Video Capture
Software into the CD-ROM drive.

Double click on the “My Computer” icon.

Double click on the CD-ROM drive icon.

Double click on the “Setup.exe” file.

Follow the instructions as they appear
on the PC monitor until the installation is
complete.

Restart the PC.

To PC connection jack

To RS-232C port

(D-sub 9-pin port)

PC connecting cable
(only supplied with VL-NZ10)

Summary of Contents for Viewcam VL-NZ10S
















































































































Search results

Summary of Contents for Viewcam VL-NZ10S

Reviews:

Related manuals for Viewcam VL-NZ10S

Brands by name

Popular brands

Sharp Viewcam VL-NZ10S, Operation Manual

Search results

Summary of Contents for Viewcam VL-NZ10S

Reviews:

Related manuals for Viewcam VL-NZ10S

Brands by name

Popular brands