GB-4
INSTALLING YOUR VCR
CONNECTING THE VCR TO THE TV, AERIAL AND
SATELLITE RECEIVER
•
Do not connect a SCART lead if you wish to tune the VCR RF channel, depending on your
TV.
•
To obtain stereo sound output, connect your stereo TV to the AUDIO OUT terminals using
audio phono leads or to the LINE 1 IN/OUT terminal using SCART leads as shown.
•
Sound from RF OUT terminal is MONO only.
•
If your TV has more than 1 SCART socket, refer to your TV operation manual for correct
SCART connection to the VCR.
✔
The VCR is correctly connected
Connect your existing aerial
cable to the ANTENNA IN socket
on your VCR.
Optional:
Connect your
Satellite receiver or decoder to
the VCR using a scart lead to
LINE 2 IN/DECODER
socket on the VCR.
Connect the VCR to the
mains
Connect your TV
to the VCR using
the supplied RF
connection cable,
i.e. connect the
VCR
RF OUT
socket to the TV
AERIAL IN
socket.
AERIAL OR
CATV CABLE
DECODER UNIT
OR SATELLITE SYSTEM
BACK OF
TELEVISION
Optional
SCART (not supplied). If you
have a scart lead connect it to your TV and
LINE 1 IN/OUT
socket on the VCR.
-The advantage of a Scart connection is
improved picture and sound quality during
playback.
Module 02E.fm Page 4 Monday, November 19, 2001 2:24 PM
http://www.usersmanualguide.com/
