Sharp VC-MH71SM Page 35 Manual Download

Page: 35 / 36

GB-35

T ROU BLESH OOT I N G

PROBLEM

A N SWER

Display is not working.

• Make sure the VCR is not in LOW POWER mode.
• Make sure the power cord is plugged in.
• Make sure the wall socket has power (plug another

appliance in).

VCR will not operate -

appears in VCR display.

• Press the

T I M ER ON /OFF

button to disengage timer.

VCR will not respond to
any commands.

• Check CHILD LOCK is not engaged.
• Safety device operating: unplug VCR for 2 hours.

Tape cannot be loaded. • Make sure there is no other tape in the VCR.

• Make sure you are loading the tape correctly.

VCR cannot be
operated by remote
control.

• Remote control is too far away from the main unit.
• Point the remote control at the VCR.
• Batteries are flat - replace both.
• Batteries have not been inserted correctly.
• VCR is positioned in strong light.

No picture appears.

• Make sure TV is set to the video channel.
• Check all connecting cables.

Rewind is not possible.

• Make sure tape is not at the start.

Picture does not change
even though

CH A N N EL

buttons are pressed.

• Make sure VCR is not in timer or menu mode.

Desired channel position
cannot be selected.

• The channel position has been set to be skipped.

Cancel the skip mode for that channel.

No colour or poor TV
picture on normal
viewing.

• Make sure all the cables are connected properly.
• Make sure VCR power cord is properly plugged in.

Playback picture is
snowy.

• Adjust the tracking using

CH A N N EL

buttons.

• Try another tape.
• The video heads may have been contaminated - refer

to a SHARP Service Facility.

Tape is automatically
ejected when pressing

REC

(

) or

T I M ER

ON /OFF

buttons.

• The record-protection tab has been removed.

Playback/ recording
does not playback in
stereo.

• Ensure VCR is connected to a stereo TV and SCART

lead.

• Programme may not carry stereo.

SHOWVIEW does not
record desired
programme.

• Broadcast does not carry VPS/PDC signal which alters

recording time.

• Check VPS/PDC mode is switched to ON.
• Ensure date and time are correctly set on the VCR.

VC-MH71SM ENGLISH.book Page 35 Tuesday, April 20, 1999 10:52 AM

Downloaded from:

http://www.usersmanualguide.com/

Summary of Contents for VC-MH71SM





































Search results

Summary of Contents for VC-MH71SM

Reviews:

Related manuals for VC-MH71SM

Brands by name

Popular brands

Sharp VC-MH71SM, Manual

Search results

Summary of Contents for VC-MH71SM

Reviews:

Related manuals for VC-MH71SM

Brands by name

Popular brands