background image

SHARP ELECTRONICS (U.K.) Ltd

.

TINS-3809UMZZ

Printed in U.K.

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC

as amended by 93/68/EEC.

• Specifications are subject to change without notice as part of our policy of continuous

improvement.

• No liability is accepted for any inaccuracies or omissions in this publication, although

every possible care has been taken to make it complete and as accurate as possible.

If you are unable to resolve a problem using the TROUBLESHOOTING guide, do not
remove the cabinet or attempt to service this VCR yourself. 

For service please contact your dealer. If this is not possible, please call our Customer
Information Centre for details of your nearest Sharp Service Centre.

In the unlikely event of this equipment requiring repair during the guarantee period, you
will need to provide proof of the date of purchase to the repairing company. Please keep
your invoice or receipt which is supplied at the time of purchase.

Certain replacement parts and accessories may be obtained from  our main parts
distributor who can be contacted at: Willow Vale Electronics Limited 
Tel. Manchester 0161 205 7531/Birmingham 0870 600 0271.  Most credit/debit cards
accepted.

SHARP Customer Helpline:  Tel: 0990 274277

CALLING FOR SERVICE

VC-M333HM cover  28/3/00  3:12 pm  Page 4

Summary of Contents for VC-M333HM











































Reviews: