manualshive.com logo in svg

Sharp VC-M333HM, Operation Manual

Share
Download
Sharp VC-M333HM Operation Manual Download Page 39

36

If problems persist contact the SHARP Helpline on tel: 0990-274277

TROUBLESHOOTING

TROUBLESHOOTING

AREA

PROBLEM

POSSIBLE CAUSE/CURE

RECORDING

Tape is automatically 
ejected when pressing 

REC

 (

) or 

TIMER

ON/OFF

 buttons.

• The record-protection tab has been removed.

VI does not 
record desired 
programme.

• Broadcast does not carry VPS/PDC signal which 

alters recording time.

• Check VPS/PDC mode is switched to ON.
• Ensure date and time are correctly set on the 

VCR.

TAPE 

TRANSPORT/

MECHANISM

Tape can not be 
loaded.

• Make sure there is no other tape in the VCR.
• Make sure you are loading the tape correctly.

Rewind is not possible.

• Make sure the tape is not at the start.

REMOTE 

CONTROL

The VCR can not be 
operated by remote 
control.

• Remote control is too far away from the main 

unit.

• Point the remote control at the VCR.
• Batteries are flat - replace both.
• Batteries have not been inserted correctly.
• VCR is positioned in strong light.

OTHER 

PROBLEMS

Picture does not 
change even though 

CHANNEL

 /

 buttons are 

pressed. 

• Make sure the VCR is not in Timer or Menu 

mode.

Desired channel 
position can not be 
selected.

• The channel position has been set to be 

skipped. Cancel the SKIP mode for that 
channel.

No colour or poor TV 
picture on normal 
viewing.

• Make sure all the cables are connected 

properly.

• Make sure the VCR power cord is properly 

plugged in.

Not possible to view 
picture or playback 
through RF OUT.

• Make sure the RF OUTPUT has not been switched 

off. (Refer to note on RF THROUGH ON/OFF in 
the TUNING THE TV TO THE VCR section of the 
manual.)

Desired channel has 
interference.

• Possible weak signal strength, the same channel 

with a better signal strength may have been 
tuned in on another VCR preset channel. 
Example;
VCR preset 1 = BBC1 and 
VCR preset 14 = BBC1
(Refer to Manually Sorting Channels section to 
move the channel to your desired position.)

• TV aerial may need adjusting.

No picture appears.

• Make sure the TV is on the video channel.
• Check all connecting cables.

TINS-3809UMZZ ENGLISH.book  Page 36  Monday, April 3, 2000  2:03 PM

Summary of Contents for VC-M333HM











































Reviews:

No comments

Brands by name

Popular brands

Load more brands