27
CUSTOMISED INSTALLATION
MANUALLY SETTING THE CLOCK
The clock will normally be set using teletext information when your VCR automatically tunes
in the broadcast channels. If for any reason teletext signals are not present your VCR will
not be able to set the clock. This procedure will allow you to set the clock manually.
CLOCK
MODE TIME DATE YEAR
24H
00:00 1/01 00 *
MODE
:24H/12H
:SELECT
▲ ▼
:CHANGE
SET :ENTER MENU :EXIT
▲
▼
NOTE:
If
AUTO CLOCK
is set to
OFF (-
is
OFF
) then you will need to update the clock for Winter/Summer
daylight saving.
1.
Press
MENU
. Press
[
]
to select
SET UP. Press
SET
to confirm.
2.
Press
[
]
to select CLOCK. Press
SET
to confirm.
3.
Press
[
]
to select either 12 or 24
hour clock.
4.
Press
[
]
to select TIME. Enter the
time using the
NUMBER BUTTONS
or
[
]
. If the minutes are less than 10,
enter the leading 0. If using the 12 hour
clock enter AM or PM by pressing
on the remote control.
5.
Press
[
]
to select DATE. Enter the
date using the
NUMBER BUTTONS
or
[
]
. For example, for 1st April
enter
01 04
.
6.
Press
[
]
to select YEAR. Enter the
last two digits of the year using the
NUMBER BUTTONS
or
[
]
. For
example, for 1998 enter
98
. For the year
2000 enter 00.
7.
Select * for
AUTO CLOCK
on/off (
*
is
ON
,
-
is
OFF
).Then press
SET
to confirm.
/
/
/
/
/
/
/
/
/
