Sharp UX-P100, Service Manual, Page: 4 / 92

1 – 2
UX-P100U
UX-P200U
[2] Operation panel
JKL
ABC
1
DEF
WXYZ
9
GHI
4 5
MNO
6
PQRS
TEL FAX
STOP COPY/HELP START/MEMORY
RESOLUTION/
RECEPTION MODE
FUNCTION
OpenLCR
REDIAL
Z A
SPEAKER
7
TUV
8
0
2 3
DOWN
UP
11 10 9 12
1
4 5
2
3
8 6
7
1. Display
This displays messages and prompts to help you operate the
machine.
2. RESOLUTION / RECEPTION MODE key
When a document is in the feeder, press this key to adjust the
resolution for faxing or copying. At any other time, press this
key to select the reception mode (an arrow in the display will
point to the currently selected reception mode).
3. Left and Right Arrow Keys
Auto-Dial Numbers: When sending a fax or making a phone
call, press these keys to scroll through your auto-dial numbers,
the "REVIEW CALLS" list (only available if you have Caller
ID), and the last number dialed (redial).
FUNCTION key settings: Press the right arrow key after
scrolling with the up and down arrow keys to select a
FUNCTION key setting.
4. Number keys
Use these keys to dial numbers, and enter numbers and
letters when storing auto-dial numbers.
5. Panel Release
Press this release to open the operation panel.
6. STOP key
Press this key to cancel operations before they are completed.
7. COPY/HELP key
When a document is in the feeder, press this key to make a
copy of a document. At any other time, press this key to print
out the Help List, a quick reference guide to the operation of
your fax machine.
8. START/MEMORY key
Press this key after dialing to begin fax transmission. Press
this key before dialing to send a fax through memory.
9. FUNCTION key
Press this key to followed by the arrow keys select special
functions and setting.
10. OpenLCR key (UX-P100U ONLY)
Press this key to register for OpenLCR service and receive
rate information to your fax.
11. UP and DOWN Arrow keys
Enlarge/Reduce setting: When marking a copy of a
document, press these keys to select an enlarge/reduce
setting.
Volume setting: When a document is not in the feeder,
press these keys to change the handset volume when the
handset is lifted, the speaker volume when the SPEAKER
key has been pressed, or the ringer volume at any other time.
FUNCTION key setting: Press these keys after pressing the
FUNCTION key to scroll through the FUNCTION MODE
settings.
12. SPEAKER key
Press this key to listen to the line and fax tones through the
speaker when faxing a document.
Note: This is not a speakerphone. You must pick up the
handset to talk with the other party.
Illustration: UX-P100U